LINE POWERED - TLOG200 does not rely on a dedicated power supply. Due to its extremely low consumption, the TLOG200 does not need external power supply since power is taken directly from the telephone line. Virtually     maintenance free

BUILT-IN DATA PRE-PROCESSING - The TLOG200 does most of the data reduction to save storage space and post-processing work with intelligent storage in event driven and in sampling tables (e.g. maximum, minimum, average, total, at specific time intervals).

INDEX REGISTER - In addition to the normal data logging functions each channel features different index register :which secures the cumulative total or meter index

4 DIGITAL CHANNELS - 4 independently programmable inputs support pulse counting with frequency up to 25Hz or can simply be used for digital inputs state recording. All Inputs are filtered to avoid wrong counting from unexpected electrical spikes

ALARMS - Early warning is provided when preset limits are exceeded. Abnormal flow values, pressure overflow or simple changes of contact status (level switches security sensors, pump on/off etc.) may be used to generate alarm calls to up to 8 different destinations.

Direct-Access – On-line information can be retrieved by the unit such as status of digital inputs, Indexes of the counters 32 bit totalizers, Average flows and pressures, Minimum or Maximum value of previous periods etc

3 PRESSURE SENSORS - Three pressure sensors are directly build on the unit making fast and reliable connection with the pipes. Pressure sensors can be of absolute type or gage type and are compensated to give a 0.4% accuracy against the atmospheric pressure fluctuation.

LARGE DATA STORAGE - Up to 64.000 readings are stored in memory. A high capacity, lithium battery provides continued operation of data logging if disconnected from telephone lines for more than 2 years.

SOFTWARE - TLOG200 is compatible with TSOFT communication and configuration software. Comprehensive data analysis and graphical display-is provided by any SCADA such as TVIEW or WIZCON or other standard Windows-based software like Excel, dBase, Access

CATHODIC PROTECTION - For corrosion control, one analog input is included to measure the exact voltage on the pipe where a TLOG200 is located.

APPLICATIONS - TLOG200 has been developed primarily for monitoring pulse output utility meters and remote pumping stations for Gas and Water zone monitoring and automatic meter reading.

REMOTE AND LOCAL INTERROGATION Programming, commissioning, testing and data collection may be carried out simply by a computer connected locally in RS232 or remotely by modem to the unit. Transmissions between TLOG200 and PC are automatically error-checked to ensure accurate transfer. Cellular capabilities are included.

PERIODIC PROGRAMMABLE CALLS - to the center at periodic intervals allows the control of the right functioning of the unit with optional upload of data.

TLOG200 POWER SUPPLY: provided by the telephone line - Integrated Lithium battery back-up > 10 years if powered from telephone line > 2 years with no external power applied Consumption 100 mA - 40 ma at 12 VDC during local communication)

INPUTS 4 Digital pulse Inputs at 25 Hz (16 Hz with cyclic redundancy of 10%) / Dry contacts 3 maximum Integrated pressure sensors / AI - Input Impedance: 100k Ohms - 8 bits resolution

1 x 50 PSI (3.45 Bars)

2 x 300 Bars (20.7 Bars) (15,30,50,100,200,300,500 PSI or 1.03,2.07,3.45,6.89,13.79, 20.68,34.4~ bars)

Pressure overflow up to 3 times of maximum pressure value (max. of 1000 PSI for 500 PSI sensor) Absolute or Gage pressure type Automatic Atmospheric compensation

CATHODIC PROTECTION measurement from -2.0 V to +2.0 V (max.50V)

DATA-LOGGING via REAL TIME CLOCK up to 64.000 time-stamped values – integral Real Time Clock

(REMOTELY MODIFIABLE) 128 Kbytes RAM (non-volatile) + 128 Kbytes Flash (ROM)

DATA STORAGE MEMORY 94 Kbytes RAM (32 Kb for Chronologies + 64 Kb for Sampling Tables - records with second time stamp accuracy /:

MINIMUM SCANNING TIME 1 second

COMMUNICATION PORTS: 1 RS232 port at 9.6 Kbaud

1 PSTN port at V22 - CCITT Compatibility Protocol: time-stamped ModBus with CRC 16 error detection

ALARMING: up to 8 phone destinations – complies with US and international paging standards

CONFIGURATION With T-SOFT software on PC locally or remotely – purchased separately

Temperature: -150C : to 600C except for pressure sensors: totally sealed to IP66

STORAGE CONDITIONS -300C to 800C

HUMIDITY 0 to 100% non-condensing

HOUSING / DIMENSIONS / MOUNTING: anodized aluminum: / 274 x 120 x 45 mm / wall plate 4 screws

WEIGHT: 875 g, excluding cables

COMPLIES with IEC 80 1-4 CE electrical and magnetic standards