60.jpg (19301 bytes)DNC 60

The DNC 60 numerical control unit is specially
designed for sheetmetal working.
Depending on the installed software,
it can be used for synchronized or non-synchronized press-brakes, of up-stroking or down-stroking type,
for shears, for tube bending machines,
for automatic machines, etc.
(see list of versions below).

The DNC 60 can control up to 4 axes, whose two are synchronized hydraulic axes, specifically used for press-brakes. It is fitted out with a monochrome screen and a simplified keyboard with large keys. The software enables the machine manufacturer to configure the axes, the inputs/outputs and the auxiliary functions according to his needs.

 Data Sheet.pdf 

Versions

DNC 60 PS, PSS: Numerical control for synchronized press-brakes. Configurable from version PS, the version PSS is destined for single cylinder presses.

Max. configuration: Y1-Y2, X, R or X-X1, X1-X2, X, Z, etc.

DNC 60 PC: Like DNC 60 PS, but for press-brakes with mechanical (or hydraulic) stops and beam control by means of a linear encoder.

Max. configuration: Y0-Y, X, R or X-X1, X1-X2, X, Z, etc.

DNC 60 P: Like DNC 60 PC, but without beam control by means of a linear encoder.

Max. configuration: Y, X, R, Z or other combinations.

DNC 60 GS: For shears with max. 4 axes. The for this application specific software controls all the typical functions for this machine, such as X3 backgauge, X1-X2 frontgauges, free axes (feeding, evacuator, etc.), blade gap, rake angle, cutting depth, etc.

DNC 60 X: Universal numerical control 1-4 axes for diverse applications. 1-4 numerical high speed axes, programmable cycles, delay functions, cams, etc. Ideal for automatic machines with programmable axes.

DNC 60 C: Numerical control for tube bending machines 1-4 axes.

DNC 60 PV: Numerical control for straight side presses 1-4 axes.

Dimensions:

Height: 290 mm / Width: 239 mm / Depth 80 / 140 (with connectors) mm.

 

 

The DNC 60 complies with the European Standards (EEC) as defined by the low voltage directive 73/23 and the EMC directive 89/336 (electro-magnetic compatibilty).