DNC 600

The DNC 600 Numerical Control is specifically designed for sheetmetal working.
Depending on the installed software,
it can be used for synchronized or
non-synchronized press-brakes of up-stroking
or down-stroking type, for shears,
for tube bending machines,
for automatic machines, etc.
(see list of versions below).

Data Sheet.pdf

The numerical control DNC 600 can in its standard version control up to 4 axes,
whose two are synchronized hydraulic axes, specifically used for press-brakes.
A special option allows to have 2 additional axes to manage up to a maximum of 6 axes.
The large monochrome screen and a simplified keyboard with large keys make the DNC 600 easy to program. The software enables the machine manufacturer to configure the machine’s axes, the inputs/outputs and the auxiliary functions according to his needs.

DNC 600 PS, PSS:  Numerical control for synchronized press-brakes. Configurable from version PS, the version PSS is destined for single cylinder presses.

Max. configuration: Y1-Y2, X, R, Z1-Z2 or X-X1, X1-X2, etc. (Max. 4 motor axes).

DNC 600 PC: Like DNC 600 PS, but for press-brakes with mechanical (or hydraulic) stops and beam control by means of a linear encoder. Max. 4 motor axes.

Max. configuration: Y0-Y, X, Z1-Z2 or X-X1, X1-X2, X, Z, etc.

DNC 600 P:  Like DNC 600 PC, but without beam control by means of a linear encoder.

Max. configuration: Y, X, X1, R or other combinations. (Max. 4 motor axes)

DNC 600 GS: For shears with max. 4 axes. For this application a specific software controls all the typical functions for this machine, such as X backgauge, X1-X2 frontgauges, free axes (feeding, evacuator, etc.), blade gap, rake angle, cutting depth, etc.

DNC 600 X: Universal numerical control 1-2 axes for diverse applications. 1-2 numerical high speed axes, programmable cycles, delay functions, cams, etc. Ideal for automatic machines with programmable axes.

DNC 600 C: Numerical control for tube bending machines 3 axes.

DNC 600 PV:Numerical control for straight side presses.