MODEVA

ModEva is a range of numerical control units intended specifically for sheet metal working. According to the software installed, it will be used on synchronised or unsynchronised press-brakes of the up-stroking or down-stroking type.

                                                                                                              Data Sheet.pdf 

ModEva numerical control units can control up to 18 axes of which 2 are synchronised hydraulic axes especially intended for press-brakes.                        

The numerical control is composed of 2 main elements:

- the programming console

- the CNC (Computerised Numerical Control).

The programming console is located within the operator's reach, generally fixed to a swivelling arm; the CNC is placed inside the electric cabinet.

The CNC is available in 2 rack formats.

- The rack version C

This is a small, very compact rack, convenient for many situations.

- The rack version M

This is a bigger rack permitting a varied combination of configurations.

The software enables manufacturers to configure the axes, the inputs/outputs and the auxiliary functions according to their needs.

Versions

PS: Version for synchronised press-brakes.

PC: Like the PS but for press-brakes with mechanical (or hydraulic) stops and beam control with a linear measuring rule.

P: Like the PC but without beam control with a linear measuring rule.

PP: Version for folding presses.

ModEva CNC /C ModEva CNC version "C" (Compact): can control up to 4/6 axes or even 18 with CAN axes*.

ModEva CNC /M ModEva CNC version "M" (Maxi): controls up to 12/14 axes or even 18 with CAN axes*.