DNC 60 Numerical control DNC 60 specifically destined for sheetmetal working. Depending on the installed software, it can be used for synchronized or non-synchronized press-brakes, of up-stroking or down-stroking type, for shears, for tube bending machines, for automatic machines, etc. (see list of versions below). The numerical control DNC 60 can control up to 4 axes, of which two are synchronized hydraulic axes, specifically destined for press-brakes. It is fitted out with a monochrome screen and a Data Sheet.pdf simplified keyboard with large keys. The software enables the machine manufacturer to configure the axes, the inputs/outputs and the auxiliary functions according to his needs. Versions DNC 60 PS, PSS: Numerical control for synchronized press-brakes. Configurable from version PS, the version PSS is destined for single cylinder presses. Max. configuration: Y1-Y2, X, R or X-X1, X1-X2, X, Z, etc. DNC 60 PC: Like DNC 60 PS, but for press-brakes with mechanical (or hydraulic) stops and beam control by means of a linear encoder. Max. configuration: Y0-Y, X, R or X-X1, X1-X2, X, Z, etc. DNC 60 P: Like DNC 60 PC, but without beam control by means of a linear encoder. Max. configuration: Y, X, R, Z or other combinations. DNC 60 GS: For shears with max. 4 axes. The for this application specific software controls all the typical functions for this machine, such as X3 backgauge, X1-X2 frontgauges, free axes (feeding, evacuator, etc.), blade gap, rake angle, cutting depth, etc. DNC 60 X: Universal numerical control 1-4 axes for diverse applications. 1-4 numerical high speed axes, programmable cycles, delay functions, cams, etc. Ideal for automatic machines with programmable axes. DNC 60 C: Numerical control for tube bending machines 1-4 axes. DNC 60 PV: Numerical control for straight side presses 1-4 axes. Dimensions: Height: 290 mm / Width: 239 mm / Depth 80 / 140 (with connectors) mm.
The DNC 60 complies with the european standards (EEC) as defined by the low voltage directive 73/23 and the EMC directive 89/336 (electro-magnetic compatibilty). |
|
DNC
60
4 axes Numerical Controls for conventional or synchronized press-brakes.
The new DNC 60 is designed for multi application purposes. Depending on which software it is equipped, the DNC 60 can be used for synchronized or non-synchronized pressbrakes, with up-stroking or down-stroking ram, shears, tube bending machines, straight side presses, automatic machines, etc. The ease of programming allows the machine builder to configure all axes, inputs/outputs and auxiliary functions according to his needs.
The DNC 60 numerical control can control up to 4 digital axes and many auxiliary functions. A backlit LCD display (130x75mm) as well as a simplified keypad with large keys provide a high comfort of use comparable to a high level numerical control.
Depending on the software, 4 to 11 languages are available directly in the DNC 60. The CYBELEC knowledge offers with this new numerical control a quick programming appreciated by all machine operators.
The DNC 60 is designed to be easily integrated in a control panel or in the electrical cabinet. Well designed, the housing protects the control electrically and mechanically and has its own mounting hardware. The new DNC 60 holds all the electronic components on one single card using the SMD technology. The FLASH memory permits, optionally, to update the software via the RS232 link. Simple commissioning as well as one single 24VDC-power supply reduces considerably the installation and cabling. Dimensions: Height: 290 mm / Width: 239 mm / Depth 80 / 140 (with connectors) mm.
The DNC 60 complies with the european standards (EEC) as defined by the low voltage directive 73/23 and the EMC directive 89/336 (electro-magnetic compatibilty). |