CYBELEC – ModEva 19T-2D


CYBELEC – ModEva 19T-2D

ModEva 19T-2D numerical control is dedicated to press brakes with a 2D graphic display.


The elegant ModEva 19T is the latest evolution in the ModEva family, and the first one to be fully controllable by means of its large 19" Touch Screen. With its broad range of features, ModEva 19T can be adapted to standard press-brakes, up to the most sophisticated models controlling a maximum of 18 axes.

With four different modes, the programming and setting up the bending of a part can be as quick, easy and comfortable as the operator wants it.

The software enables manufacturers to configure axes, inputs/outputs and auxiliary functions according to their needs.

ModEva 19T can manage sophisticated features such as complex bending aids, angle measurement, or slave axes, among others.

 

Easy Operating

 

 
Better Bending

 

 

Powerful

 

            -Minimum length against the operator.
            -Minimum return.
            -Maximum accuracy between two defined faces.
            -Minimum operator manipulation.

 

ModEva 19T comes with PC-ModEva offline bending software. PC-ModEva software allows you to prepare your programs, calculate offers and check feasibility of the parts on your desktop computer.

 

Versions

 

Compact rack: 2, 4 or 6 axes, and up to 10 axes with NCX CANopen axis controller board.
Medium rack: 4, 6, 8, 10 or 12 axes, and up to 18 axes with NCX CANopen axis controller board.

 

Some Software Options


S-OFT-OPT08                   Message interpreter
S-OFT-OPT38                   Rear axes H1 and H2 (sheet support)
S-OFT-OPT42                   Conventional bending aids, AP1 to AP4
S-OFT-OPT52                   Front axes H3 and H4
S-OFT-OPT89                   Tandem management

 

Ordering Information

 

Console           
S-MOD-19T
Compact Rack, 6 axes, 2D software     
S-CNC-CA06PS12
Medium Rack, 8 axes with NLR board, 2D software       S-CNC-MA08PSN12
Medium Rack, 12 axes with NLR board, 3D software       S-CNC-MA12PSNE

 

Console  
Screen
18.5" TFT
Resolution 1366 x 768 (WXGA)
Touch screen
Yes
USB Port 1 x USB 2.0
Power
Through the panel link
Seal
IP 54
P-Link

2 cables RJ45 twisted pair category 6.
Cables 5 m or 10 m with Cybelec repeater.

Handle
Included
Operating Conditions

Min. 5° Celsius, max. 40° Celsius.
Relative humidity 10 to 85% non-condensing.    

If the ambient temperature approaches or exceeds 40° Celsius, it is advisable to install special ventilation.                 

EC Directives
EC61131-2.
Available Languages
English, Français, Deutsch, Italiano, Český, Türkçe, 中文, 台灣, Español,
Hrvatsko, Dansk, Magyar, Polski, Русский, Slovensko.
Weight
Approximately 9.6 kg.

 

CNC  
System
Windows© 7 Embedded
CPU
AMD Fusion T40R – 1GHz
RAM
4 GB
Disk
16 GB flash
Communication
2 RS232 – 1 configurable, e.g. for Lazer Safe’s protection devices
2 PS/2 for mouse or keyboard input
1 RJ45 Ethernet for network
1 parallel port (printer)
1 STD VGA Screen output
Y1,Y2
NPU board
Analog Axes

2 per board           NMX, NSX boards, according to configuration and rack version.

                             Zout output impedance < 100 Ω , Zi load ≥ 10 kΩ

CAN Axes NCX boards         Depending on configuration and rack version.
Incremental Encoders

5V DC                  Line driver, complementary signals are mandatory.

Digital Inputs
32                         NIN boards, 24 VDC opto-coupled.
Digital Outputs 32                         NOT boards, 24 VDC "sources".
                             Max 2.5 A / output (NOT 204).
                             Max 6 A / board.
Analog Inputs
6                           NIN boards.
                            
Depending on configuration 0-10, 0-24 VDC A/D 8 bits.
Analog Outputs
4                            NOT boards, 0-10 VDC (8 bits) for the auxiliary functions,
                              Zout output impedance < 100 Ω , Zi load ≥ 10 kΩ
Power Supply
24 VDC / max. 4A ± 15%.
Seal
Must be installed in an approved electric cabinet.
Operating Conditions

Min. 5° Celsius, max. 40° Celsius.
Relative humidity 10 to 85% non-condensing.   

If the ambient temperature approaches or exceeds 40° Celsius, it is advisable to install special ventilation, or even air-conditioning.                          

EC Directives
IEC61131-2.
Weight Rack version C: approx. 5 kg.
Rack version M: approx. 6 kg. Depending on equipment.
Rack version L: approx. 7 kg. Depending on equipment.


You can send questions about the product...