RMC-B2 is a digital input and output board that is developed for Punch and Laser machines. The RMC-B2 board contains 32 digital outputs and 48 digital Inputs. The board also contains three CAN bus connection for the same channel (Two of them are used for DB9 connection and one of them is used for RJ45 connection). One RS232 connection, one USB connection and one RS485 connection are also available on the RMC-B2 board.
Power Supply (Logic) 21-27 VDC
Power Consumption Approx. 150mA @24V DC (Logic)
Digital Outputs
32 Digital outputs
I ≤ 100mA for each digital output @24 VDC
Ambient Temperature Range Minimum 00C, Maximum +500C
Digital Inputs
48 Digital inputs @ 24 VDC
Interfaces RS232 Sub-D connector for PC communication
USB slave connector for PC or USB Master Connection
RS485 Connection
3 CAN Bus Connection (2 DB9 and 1 RJ45)
Features LED indication for each output
LED indication for each input
LED indication of power on/off condition
Short circuit proof at outputs
Reverse polarity protection
7 Internal LED indication
16 Programmable DIP Switch
Screw terminals for AWG 16-30 Wire
Dimensions 108mm x 292mm
Weight 400 gr

You can send questions about the product...